Back to

Professor Yansong Shen

Professor

BEng School of Materials and Metallurgy (Top Student Class)

1996-2001 Northeastern University, Shenyang, China

MEng School of Materials and Metallurgy

2001-2003 Northeastern University, Shenyang, China

PhD School of Materials Science and Engineering

2004-2009 The University of New South Wales, Sydney, Australia

Engineering

School of Chemical Engineering

Please see details in group website: http://www.SCoPE.unsw.edu.au/

Mobile

www.SCoPE.unsw.edu.au

Phone

+61 2 9385 4448

E-mail

ys.shen@unsw.edu.au

Location

Room 401, Science and Engineering Building (E8) web: http://www.SCoPE.unsw.edu.au/

Journal articles | 2026

Farajzadeh E; Zhuo Y; Shen Y, 2026, 'CFD-FEA modelling of tuyere damage in an industrial ironmaking blast furnace: A case of coke oven gas injection', Fuel, 410, pp. 137845 - 137845, http://dx.doi.org/10.1016/j.fuel.2025.137845

Journal articles | 2026

Gou D; Shen Y, 2026, 'A GPU-based CFD-DEM approach for modelling of complex gas-solid flow with heat transfer', International Journal of Heat and Mass Transfer, 256, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2025.128014

Journal articles | 2026

Gou D; Shen Y, 2026, 'GPU-based reactive-CFD-DEM (rCFD-DEM) modelling of multiphase reacting flows in an industrial-scale blast furnace: Enabling particle-scale high-speed simulations', Chemical Engineering Science, 322, http://dx.doi.org/10.1016/j.ces.2025.123007

Journal articles | 2026

He C; Zhuo Y; Shen Y, 2026, 'Improving particle separation and recovery of valuable materials from end-of-life solar panels', Resources Conservation and Recycling, 225, http://dx.doi.org/10.1016/j.resconrec.2025.108594

Journal articles | 2026

Jia T; Gou D; Shen Y, 2026, 'Variation of dominant heat transfer mode under different conditions in a gas-solid fluidised bed: A particle-scale study', Chemical Engineering Science, 320, http://dx.doi.org/10.1016/j.ces.2025.122421

Journal articles | 2026

Jung S; Zhuo Y; Shen Y, 2026, 'Numerical study of a metal hydride hydrogen storage system equipped with phase change material', Fuel, 410, pp. 137842 - 137842, http://dx.doi.org/10.1016/j.fuel.2025.137842

Journal articles | 2026

Yu G; Zhuo Y; Li S; Shen Y, 2026, 'Collaborative simulation of multiphase reacting flow chemical looping combustion system equipped with controllers: From a fuel reactor to a full loop system', Chemical Engineering Science, 319, http://dx.doi.org/10.1016/j.ces.2025.122320

Journal articles | 2025

Chen H; Li W; Bao J; Shen Y, 2025, 'A mPOD-based reduced-order modelling approach for fast gas-solid flow simulations', Chemical Engineering Science, 306, http://dx.doi.org/10.1016/j.ces.2024.121155

Journal articles | 2025

Chen H; Li W; Bao J; Shen Y, 2025, 'Reduced-order estimator with error-triggered data assimilation correction: Towards a digital twin of gas–solid flow reactors', Chemical Engineering Journal, 526, http://dx.doi.org/10.1016/j.cej.2025.171017

Journal articles | 2025

Chowdhury H; Xie Z; Shen Y, 2025, 'Superquadric DEM study of the particle separation process in a multi-deck banana vibrating screen', Advanced Powder Technology, 36, http://dx.doi.org/10.1016/j.apt.2025.105003

Journal articles | 2025

Gou D; Shen Y, 2025, 'GPU-accelerated CFD-DEM framework for large-scale gas-solid flows with superquadric particles', Chemical Engineering Journal, 525, http://dx.doi.org/10.1016/j.cej.2025.170046

Journal articles | 2025

Kan H; Wang S; Xie Z; Shen Y, 2025, 'Reactive CFD-DEM modelling of particle-scale gas-solid flows in an industrial ironmaking blast furnace', Chemical Engineering Journal, 525, http://dx.doi.org/10.1016/j.cej.2025.169942

Journal articles | 2025

Kang P; Xu D; Shen Y, 2025, 'How hydrogen injection impacts raceway reacting flow in an ironmaking blast furnace: An industrial-scale CFD-DEM study', Chemical Engineering Science, 309, http://dx.doi.org/10.1016/j.ces.2025.121423

Journal articles | 2025

Li S; Zhuo Y; Shen Y, 2025, 'CFD study of washing contaminations in a milk bottle recycling process', Powder Technology, 453, http://dx.doi.org/10.1016/j.powtec.2025.120684

Journal articles | 2025

Luo Z; Tang X; Xie Z; Shen Y, 2025, 'Experimental investigation of the hydrodynamics of chip-like particles in a flat-base spouted bed', Advanced Powder Technology, 36, http://dx.doi.org/10.1016/j.apt.2025.105080

Journal articles | 2025

Luo Z; Wang S; Shen Y, 2025, 'A multi-superquadric DEM method for high-fidelity modelling mixing and breakage of non-spherical particles in rotary drums', Advanced Powder Technology, 36, http://dx.doi.org/10.1016/j.apt.2025.105076

Journal articles | 2025

Wang S; Shen Y, 2025, 'A new model framework of laser powder bed fusion by integrating a powder-scale model with a thermodynamic database', Chemical Engineering Science, 302, http://dx.doi.org/10.1016/j.ces.2024.120788

Journal articles | 2025

Wang S; Shen Y, 2025, 'CFD-DEM modelling of dense gas-solid reacting flow: Recent advances and challenges', Progress in Energy and Combustion Science, 109, http://dx.doi.org/10.1016/j.pecs.2025.101221

Journal articles | 2025

Wong XY; Jiang L; Zhuo Y; Wang DW; Shen Y, 2025, 'A novel flow channel design for improving water splitting in anion exchange membrane electrolysers', Chemical Engineering Journal, 521, pp. 166404, http://dx.doi.org/10.1016/j.cej.2025.166404

Journal articles | 2025

Wong XY; Zhuo Y; Ren X; Joshi R; Shen Y, 2025, 'Systematic mapping of hydrogen and oxygen bubble contact angles under alkaline water electrolysis conditions: Effects of temperature, KOH concentration, and immersion time', Powder Technology, 465, http://dx.doi.org/10.1016/j.powtec.2025.121346

Journal articles | 2025

Xie J; Yu X; Shen Y, 2025, 'Transient-state three-dimensional modelling of an industrial-scale ironmaking blast furnace', Chemical Engineering Journal, 520, http://dx.doi.org/10.1016/j.cej.2025.166225

Journal articles | 2025

Xie Z; Shen Y, 2025, 'High-fidelity modelling of unburnt coal flow in an industry-scale blast furnace using a hybrid CFD-DEM method', Chemical Engineering Science, 302, http://dx.doi.org/10.1016/j.ces.2024.120929

Journal articles | 2025

Xu D; Xie Z; Shen Y, 2025, 'Coarse-grained superquadric DEM-CFD model for gas–solid flow with non-spherical particles', Chemical Engineering Science, 315, http://dx.doi.org/10.1016/j.ces.2025.121838

Journal articles | 2025

Yu X; Shen Y, 2025, 'Transient-state behaviours of blast furnace ironmaking: the role of shaft-injected hydrogen', Advanced Powder Technology, 36, http://dx.doi.org/10.1016/j.apt.2025.105040

Journal articles | 2025

Zhao Z; Yu X; Shen Y, 2025, 'Effects and mechanism of using ferro-coke in an ironmaking blast furnace – A virtual experiment', Fuel, 382, http://dx.doi.org/10.1016/j.fuel.2024.133726

Journal articles | 2024

Ajorloo M; Ghodrat M; Scott J; Strezov V; Zhuo Y; Shen Y, 2024, 'Exploring the feasibility of Co-gasification of biomass and EVA from End-of-Life solar panels', Energy, 313, http://dx.doi.org/10.1016/j.energy.2024.133899

Journal articles | 2024

Chen W; Wang W; Xie Z; Centurion F; Sun B; Paterson DJ; Tsao SCH; Chu D; Shen Y; Mao G; Gu Z, 2024, 'Size-Dependent Penetration of Nanoparticles in Tumor Spheroids: A Multidimensional and Quantitative Study of Transcellular and Paracellular Pathways', Small, 20, http://dx.doi.org/10.1002/smll.202304693

Journal articles | 2024

Chen Z; Wei W; Chen X; Liu Y; Shen Y; Ni BJ, 2024, 'Upcycling of plastic wastes for hydrogen production: Advances and perspectives', Renewable and Sustainable Energy Reviews, 195, http://dx.doi.org/10.1016/j.rser.2024.114333

Journal articles | 2024

Farajzadeh E; Zhuo Y; Shen Y, 2024, 'Numerical investigation of the impact of injecting coke oven gas on raceway evolution in an ironmaking blast furnace', Fuel, 358, http://dx.doi.org/10.1016/j.fuel.2023.130345

Journal articles | 2024

Gan MJ; Liu Y; Shen Y, 2024, 'Co-injection of hydrogen and biochar (CoHB) in a simulated blast furnace: A univariate and multivariate study', Fuel, 371, http://dx.doi.org/10.1016/j.fuel.2024.131966

Journal articles | 2024

Gou D; Shen Y, 2024, 'GPU-accelerated CFD-DEM modeling of gas-solid flow with complex geometry and an application to raceway dynamics in industry-scale blast furnaces', Chemical Engineering Science, 294, http://dx.doi.org/10.1016/j.ces.2024.120101

Journal articles | 2024

Gou D; Shen Y, 2024, 'GPU-powered CFD-DEM framework for modelling large-scale gas–solid reacting flows (GPU- rCFD-DEM) and an industry application', Chemical Engineering Science, 299, http://dx.doi.org/10.1016/j.ces.2024.120536

Journal articles | 2024

Jin X; Shen Y, 2024, 'Current Progress of Experimental and Simulation Work of Mixing Processes in Particulate Systems', Kona Powder and Particle Journal, 2024, pp. 151 - 171, http://dx.doi.org/10.14356/kona.2024015

Journal articles | 2024

Jin X; Zhuo Y; He C; Xie Z; Shen Y, 2024, 'Design and optimisation of rotary vibrating screening process in silicon photovoltaic panel recycling: A particle-scale model study', Powder Technology, 440, http://dx.doi.org/10.1016/j.powtec.2024.119787

Journal articles | 2024

Luo Z; Wang S; Shen Y, 2024, 'Super-quadric CFD-DEM study of spout deflection behaviour of non-spherical particles in a spout fluidized bed', Powder Technology, 433, http://dx.doi.org/10.1016/j.powtec.2023.119240

Journal articles | 2024

Mohamed Mohsin H; Zhuo Y; Shen Y, 2024, 'Eulerian-Eulerian-VOF multifluid modelling of liquid–gas reacting flow for hydrogen generation in an alkaline water electrolyser', Fuel, 373, http://dx.doi.org/10.1016/j.fuel.2024.132164

Journal articles | 2024

Song S; Li Q; Leslie G; Shen Y, 2024, 'Water treatment methods in heavy metals removal during photovoltaic modules recycling: a review', Resources Conservation and Recycling, 208, http://dx.doi.org/10.1016/j.resconrec.2024.107701

Journal articles | 2024

Song S; Zhuo Y; Li Q; Shen Y, 2024, 'Silver Recovery from Crystalline Silicon Photovoltaic Solar Cells Using Continuous Stirred-Tank Reactors', Advanced Materials, 36, http://dx.doi.org/10.1002/adma.202403653

Journal articles | 2024

Tang X; Shen Y, 2024, 'A bilateral semi-resolved CFD-DEM approach for cost-effective modelling in a rotary drum', Chemical Engineering Science, 299, http://dx.doi.org/10.1016/j.ces.2024.120491

Journal articles | 2024

Tang X; Wang S; Jin X; Shen Y, 2024, 'Super-quadric CFD-DEM modelling of chip-like particle-liquid flow in a rotary drum', Powder Technology, 435, http://dx.doi.org/10.1016/j.powtec.2024.119363

Journal articles | 2024

Tang X; Wang S; Shen Y, 2024, 'Super-quadric CFD-DEM-VOF modelling of gas–solid-liquid systems', Advanced Powder Technology, 35, http://dx.doi.org/10.1016/j.apt.2023.104282

Journal articles | 2024

Wang S; Shen Y, 2024, 'CFD-DEM study of thermal behaviours of chip-like particles flow in a fluidized bed', Powder Technology, 445, http://dx.doi.org/10.1016/j.powtec.2024.120066

Journal articles | 2024

Wang X; Yu X; Peng W; Shen Y, 2024, 'Numerical study on combustion zone behaviors of a slagging gasifier', Huagong Xuebao Ciesc Journal, 75, pp. 659 - 674, http://dx.doi.org/10.11949/0438-1157.20230681

Journal articles | 2024

Xie J; Yu X; Shen Y, 2024, 'How blast rate variation affects dynamic in-furnace behaviours and energy consumption of an industrial-scale blast furnace: A transient-state CFD study', Powder Technology, 448, http://dx.doi.org/10.1016/j.powtec.2024.120348

Journal articles | 2024

Xie Z; Chen W; Wang W; Gu Z; Shen Y, 2024, 'Particle-scale study on extracellular penetration of nanoparticles in tumor tissues', Materials Today Physics, 44, http://dx.doi.org/10.1016/j.mtphys.2024.101428

Journal articles | 2024

Xu D; Shen Y, 2024, 'A novel CFD-DEM-DPM modelling of fluid-particles-fines reacting flows', Chemical Engineering Science, 292, http://dx.doi.org/10.1016/j.ces.2024.120014

Journal articles | 2024

Xu D; Shen Y, 2024, 'Numerical assessment of the drag force and Nusselt number during droplet impingement onto a particle', Physics of Fluids, 36, http://dx.doi.org/10.1063/5.0201897

Journal articles | 2024

Yu G; Zhuo Y; Li S; Shen Y, 2024, 'Collaborative modelling of gas-solid reacting flow in a fuel reactor equipped with process controllers in chemical looping combustion/conversion', Chemical Engineering Journal, 497, http://dx.doi.org/10.1016/j.cej.2024.154437

Journal articles | 2024

Yu X; Shen Y, 2024, 'CFD study of the residence time distribution of shaft-injected hydrogen in a blast furnace', Fuel, 372, http://dx.doi.org/10.1016/j.fuel.2024.132193

Journal articles | 2024

Yu X; Shen Y, 2024, 'Numerical study of raceway behaviours of a slow-moving packed bed solid fuel gasifier', Fuel, 367, http://dx.doi.org/10.1016/j.fuel.2024.131550

Journal articles | 2024

Zhao Z; Yu X; Shen Y, 2024, 'Numerical study of the feasibility of injecting CO2-containing off-gas in an ironmaking blast furnace', Fuel, 361, http://dx.doi.org/10.1016/j.fuel.2023.130648

Journal articles | 2024

Zhuo M; Chen Z; Liu X; Wei W; Shen Y; Ni BJ, 2024, 'A broad horizon for sustainable catalytic oxidation of microplastics', Environmental Pollution, 340, http://dx.doi.org/10.1016/j.envpol.2023.122835

Journal articles | 2023

Chen Z; Wei W; Shen Y; Ni BJ, 2023, 'Defective nickel sulfide hierarchical structures for efficient electrochemical conversion of plastic waste to value-added chemicals and hydrogen fuel', Green Chemistry, 25, pp. 5979 - 5988, http://dx.doi.org/10.1039/d3gc01499a

Journal articles | 2023

Chen Z; Zheng R; Bao T; Ma T; Wei W; Shen Y; Ni BJ, 2023, 'Dual-Doped Nickel Sulfide for Electro-Upgrading Polyethylene Terephthalate into Valuable Chemicals and Hydrogen Fuel', Nano Micro Letters, 15, http://dx.doi.org/10.1007/s40820-023-01181-8

Journal articles | 2023

Dastafkan K; Wang S; Song S; Meyer Q; Zhang Q; Shen Y; Zhao C, 2023, 'Operando monitoring of gas bubble evolution in water electrolysis by single high-frequency impedance', Ees Catalysis, 1, pp. 998 - 1008, http://dx.doi.org/10.1039/d3ey00182b

Journal articles | 2023

Gan MJ; Liu Y; Shen Y, 2023, 'A novel ironmaking decarbonisation technology — co-injection of hydrogen and biochar (CoHB): A CFD study of combustion in the raceway under simulated blast furnace conditions', Fuel, 350, http://dx.doi.org/10.1016/j.fuel.2023.128745

Journal articles | 2023

Jia C; Zhao Y; Song S; Sun Q; Meyer Q; Liu S; Shen Y; Zhao C, 2023, 'Highly Ordered Hierarchical Porous Single-Atom Fe Catalyst with Promoted Mass Transfer for Efficient Electroreduction of CO2', Advanced Energy Materials, 13, http://dx.doi.org/10.1002/aenm.202302007

Journal articles | 2023

Jin X; Shen Y, 2023, 'DEM study of mixing performance of superquadric particles in an industrial-scale ribbon mixer', Advanced Powder Technology, 34, http://dx.doi.org/10.1016/j.apt.2023.104239

Journal articles | 2023

Li S; Zhuo Y; Shen Y, 2023, 'Modelling of multiphase reactive flows in a full-loop coal-direct chemical looping combustor', Chemical Engineering Journal, 457, http://dx.doi.org/10.1016/j.cej.2023.141306

Journal articles | 2023

Liu X; Chen Z; Lu S; Xu B; Cheng D; Wei W; Shen Y; Ni BJ, 2023, 'Heterogeneous photocatalytic conversion of biomass to biofuels: A review', Chemical Engineering Journal, 476, http://dx.doi.org/10.1016/j.cej.2023.146794

Journal articles | 2023

Luo Z; Yue Y; Wang S; Shen Y, 2023, 'CFD-DEM study of spout deflection behavior of cohesive particles in a spout fluidized bed', Powder Technology, 427, http://dx.doi.org/10.1016/j.powtec.2023.118758

Journal articles | 2023

Shen F; Long F; Zhang W; Wang S; Zheng H; Shen Y, 2023, 'Thermodynamic analysis of carbon deposition in the preparation of hydrogen-rich reducing gas for direct reduction processes', Fuel, 349, http://dx.doi.org/10.1016/j.fuel.2023.128739

Journal articles | 2023

Song S; He C; Zhuo Y; Yue Y; Shen Y, 2023, 'How particle sizes affect silver leaching from c-Si photovoltaic solar cells: Insights from integrated experimental and numerical investigations', Solar Energy Materials and Solar Cells, 261, http://dx.doi.org/10.1016/j.solmat.2023.112520

Journal articles | 2023

Song S; Le-Clech P; Shen Y, 2023, 'Microscale fluid and particle dynamics in filtration processes in water treatment: A review', Water Research, 233, http://dx.doi.org/10.1016/j.watres.2023.119746

Journal articles | 2023

Song S; Shen Y, 2023, 'Numerical investigation of drag property for fluid flow through packed beds of super-quadric chip-like particles', Powder Technology, 428, http://dx.doi.org/10.1016/j.powtec.2023.118787

Journal articles | 2023

Tang X; Yue Y; Shen Y, 2023, 'Prediction of separation efficiency in gas cyclones based on RSM and GA-BP: Effect of geometry designs', Powder Technology, 416, http://dx.doi.org/10.1016/j.powtec.2022.118185

Journal articles | 2023

Wang M; Meng Q; Shen Y; Shi P, 2023, 'Stochastic H2/ H∞ Control for Mean-Field Stochastic Differential Systems with (x, u, v)-Dependent Noise', Journal of Optimization Theory and Applications, 197, pp. 1024 - 1060, http://dx.doi.org/10.1007/s10957-023-02220-5

Journal articles | 2023

Wang S; Shen Y, 2023, 'CFD-DEM-VOF-phase diagram modelling of multi-phase flow with phase changes', Chemical Engineering Science, 273, http://dx.doi.org/10.1016/j.ces.2023.118651

Journal articles | 2023

Wu C; Zhuo Y; Xu X; Xie Z; Tang S; Jiang Y; Shen Y; Meng Q, 2023, '3D transient CFD study of iron-coke briquettes pyrolysis and quench processes in an optimised gas heat carrier pyrolyser', Powder Technology, 420, http://dx.doi.org/10.1016/j.powtec.2023.118372

Journal articles | 2023

Xie Z; Wang S; Shen Y, 2023, 'A novel hybrid CFD-DEM method for high-fidelity multi-resolution modelling of cross-scale particulate flow', Chemical Engineering Journal, 455, http://dx.doi.org/10.1016/j.cej.2022.140731

Journal articles | 2023

Xie Z; Wang S; Shen Y, 2023, 'Roles of clusters in the migration of fines through porous media', Chemical Engineering Science, 265, http://dx.doi.org/10.1016/j.ces.2022.118217

Journal articles | 2023

Xu D; Wang S; Shen Y, 2023, 'An improved CFD-DEM modelling of raceway dynamics and coke combustion in an industrial-scale blast furnace', Chemical Engineering Journal, 455, http://dx.doi.org/10.1016/j.cej.2022.140677

Journal articles | 2023

Xu D; Wang S; Shen Y, 2023, 'Numerical investigation of the reacting flows of three adjunct raceways in an industrial-scale blast furnace', Fuel, 354, http://dx.doi.org/10.1016/j.fuel.2023.129339

Journal articles | 2023

Yu X; Shen Y, 2023, 'Numerical study of transient thermochemical states inside an ironmaking blast furnace: Impacts of blast temperature drop and recovery', Fuel, 348, http://dx.doi.org/10.1016/j.fuel.2023.128471

Journal articles | 2023

Zhang W; Zheng Q; Yu X; Shen Y; Li K, 2023, 'Numerical Calculation and 3-D Imaging of the Arrhenius Temperature Integral', Separations, 10, http://dx.doi.org/10.3390/separations10090480

Journal articles | 2023

Zhao Z; Yu X; Li Y; Zhu J; Shen Y, 2023, 'CFD study of hydrogen co-injection through tuyere and shaft of an ironmaking blast furnace', Fuel, 348, http://dx.doi.org/10.1016/j.fuel.2023.128641

Journal articles | 2023

Zhuo Y; Shen Y, 2023, 'Transient 3D CFD study of pulverised coal combustion and coke combustion in a blast furnace: Effect of blast conditions', Fuel, 340, http://dx.doi.org/10.1016/j.fuel.2023.127468

Journal articles | 2022

Deng R; Zhuo Y; Shen Y, 2022, 'Recent progress in silicon photovoltaic module recycling processes', Resources Conservation and Recycling, 187, http://dx.doi.org/10.1016/j.resconrec.2022.106612

Journal articles | 2022

Guo Z; Wu Y; Xie Z; Shao J; Liu J; Yao Y; Wang J; Shen Y; Gooding JJ; Liang K, 2022, 'Self-Propelled Initiative Collision at Microelectrodes with Vertically Mobile Micromotors', Angewandte Chemie International Edition, 61, pp. e202209747, http://dx.doi.org/10.1002/anie.202209747

Journal articles | 2022

Guo Z; Wu Y; Xie Z; Shao J; Liu J; Yao Y; Wang J; Shen Y; Gooding JJ; Liang K, 2022, 'Self‐Propelled Initiative Collision at Microelectrodes with Vertically Mobile Micromotors', Angewandte Chemie, 134, http://dx.doi.org/10.1002/ange.202209747

Journal articles | 2022

Hu Y; Zhou H; She X; Kou M; Wu S; Zhang Z; Shen Y, 2022, 'Numerical Simulation of Combustion Characteristics in the Dome Zone of the COREX Melter-Gasifier: The Effect of Rising Gas', Industrial and Engineering Chemistry Research, 61, pp. 931 - 941, http://dx.doi.org/10.1021/acs.iecr.1c03774

Journal articles | 2022

Jin X; Chandratilleke GR; Wang S; Shen Y, 2022, 'DEM investigation of mixing indices in a ribbon mixer', Particuology, 60, pp. 37 - 47, http://dx.doi.org/10.1016/j.partic.2021.03.005

Journal articles | 2022

Jin X; Wang S; Shen Y, 2022, 'DEM study of mixing behaviours of cohesive particles in a U-shaped ribbon mixer', Powder Technology, 399, http://dx.doi.org/10.1016/j.powtec.2021.117097

Journal articles | 2022

Jin X; Wang S; Shen Y, 2022, 'DEM study of the effect of impeller design on mixing performance in a U-shape ribbon mixer', Advanced Powder Technology, 33, http://dx.doi.org/10.1016/j.apt.2021.10.026

Journal articles | 2022

Jin X; Wang S; Shen Y, 2022, 'Effects of operating conditions and particle properties on mixing performance in an industrial-scale U-shape ribbon mixer', Powder Technology, 411, http://dx.doi.org/10.1016/j.powtec.2022.117933

Journal articles | 2022

Li CX; Dong KJ; Liu SD; Chandratilleke GR; Zhou ZY; Shen YS, 2022, 'DEM study of particle segregation in the throat region of a blast furnace', Powder Technology, 407, http://dx.doi.org/10.1016/j.powtec.2022.117660

Journal articles | 2022

Li S; Shen Y, 2022, 'An approach to simulate gas-solid flow systems with process controllers', Chemical Engineering Journal, 429, http://dx.doi.org/10.1016/j.cej.2021.132443

Journal articles | 2022

Li S; Shen Y, 2022, 'Numerical simulation of multiphase flow in a full coal-direct chemical looping combustion process', Chemical Engineering Science, 248, http://dx.doi.org/10.1016/j.ces.2021.117233

Journal articles | 2022

Liu Y; Shen Y, 2022, 'HMB-CFD study of oxygen-enriched pulverised coal combustion in an ironmaking blast furnace', Powder Technology, 407, http://dx.doi.org/10.1016/j.powtec.2022.117610

Journal articles | 2022

Liu Y; Zhang H; Shen Y, 2022, 'A data-driven approach for the quick prediction of in-furnace phenomena of pulverized coal combustion in an ironmaking blast furnace', Chemical Engineering Science, 260, http://dx.doi.org/10.1016/j.ces.2022.117945

Journal articles | 2022

Song S; Rong L; Dong K; Liu X; Le-Clech P; Shen Y, 2022, 'Pore-scale numerical study of intrinsic permeability for fluid flow through asymmetric ceramic microfiltration membranes', Journal of Membrane Science, 642, http://dx.doi.org/10.1016/j.memsci.2021.119920

Journal articles | 2022

Song S; Rong L; Dong K; Shen Y, 2022, 'Numerical study of the hydraulic tortuosity for fluid flow through elliptical particle packings', Powder Technology, 398, http://dx.doi.org/10.1016/j.powtec.2021.117047

Journal articles | 2022

Song S; Wang S; Le-Clech P; Shen Y, 2022, 'LBM-DEM simulation of particle deposition and resuspension of pre-deposited dynamic membrane', Powder Technology, 407, http://dx.doi.org/10.1016/j.powtec.2022.117637

Journal articles | 2022

Tamil Selvi S; Visalakshi P, 2022, 'Detection of unique delete attack in wireless sensor network using gradient thresholding-long short-term memory algorithm', Concurrency and Computation Practice and Experience, 34, http://dx.doi.org/10.1002/cpe.7332

Journal articles | 2022

Tang X; Yue Y; Wang S; Shen Y, 2022, 'Modelling of gas-solid-liquid flow and particle mixing in a rotary drum', Powder Technology, 409, http://dx.doi.org/10.1016/j.powtec.2022.117758

Journal articles | 2022

Wang S; Shen Y, 2022, 'Coarse-grained CFD-DEM modelling of dense gas-solid reacting flow', International Journal of Heat and Mass Transfer, 184, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2021.122302

Journal articles | 2022

Wang S; Shen Y, 2022, 'Particle-scale modelling of the pyrolysis of end-of-life solar panel particles in fluidized bed reactors', Resources Conservation and Recycling, 183, http://dx.doi.org/10.1016/j.resconrec.2022.106378

Journal articles | 2022

Wang S; Shen Y, 2022, 'Super-quadric CFD-DEM simulation of chip-like particles flow in a fluidized bed', Chemical Engineering Science, 251, http://dx.doi.org/10.1016/j.ces.2022.117431

Journal articles | 2022

Wu C; Zhuo Y; Xu X; Farajzadeh E; Dou J; Yu J; Shen Y; Zhang Z, 2022, 'A combined experimental and numerical study of coal briquettes pyrolysis using recycled gas in an industrial scale pyrolyser', Powder Technology, 404, http://dx.doi.org/10.1016/j.powtec.2022.117477

Journal articles | 2022

Wu C; Zhuo Y; Xu X; Xie Z; Tang S; Jiang Y; Shen Y; Meng Q, 2022, 'An integrated experimental and numerical study of iron-coke briquettes' pyrolysis and reduction behaviour in an industrial-scale pyrolyser', Powder Technology, 409, http://dx.doi.org/10.1016/j.powtec.2022.117822

Journal articles | 2022

Xie Z; Gu X; Shen Y, 2022, 'A Machine Learning Study of Predicting Mixing and Segregation Behaviors in a Bidisperse Solid-Liquid Fluidized Bed', Industrial and Engineering Chemistry Research, 61, pp. 8551 - 8565, http://dx.doi.org/10.1021/acs.iecr.2c00071

Journal articles | 2022

Xie Z; Wang S; Shen Y, 2022, 'Particle-scale modelling of rapid granular filtration in a dual-media filter', Separation and Purification Technology, 302, http://dx.doi.org/10.1016/j.seppur.2022.122076

Journal articles | 2022

Xu D; Shen Y, 2022, 'An improved machine learning approach for predicting granular flows', Chemical Engineering Journal, 450, http://dx.doi.org/10.1016/j.cej.2022.138036

Journal articles | 2022

Xu D; Wang S; Shen Y, 2022, 'Coarse-grained rCFD-DEM analysis of coke gasification and iron ore reduction in the shaft region of an ironmaking blast furnace', Powder Technology, 408, http://dx.doi.org/10.1016/j.powtec.2022.117706

Journal articles | 2022

Yu X; Li Y; Xu H; Shen Y, 2022, 'Effects of shaft angle on the performance of an ironmaking blast furnace: A CFD study', Powder Technology, 407, http://dx.doi.org/10.1016/j.powtec.2022.117646

Journal articles | 2022

Yu X; Shen Y, 2022, 'Transient State modeling of Industry-scale ironmaking blast furnaces', Chemical Engineering Science, 248, http://dx.doi.org/10.1016/j.ces.2021.117185

Journal articles | 2022

Yue Y; Shen Y, 2022, 'CFD-DEM study of spout incoherence phenomena in a conical spouted bed', Powder Technology, 406, http://dx.doi.org/10.1016/j.powtec.2022.117529

Journal articles | 2022

Yue Y; Zhuo Y; Li Q; Shen Y, 2022, 'Experimental and numerical study of extracting silver from end-of-life c-Si photovoltaic solar cells in rotating systems', Resources Conservation and Recycling, 186, http://dx.doi.org/10.1016/j.resconrec.2022.106548

Journal articles | 2022

Zhao Z; Yu X; Shen Y, 2022, 'Transient CFD study of wet burden charging on dynamic in-furnace phenomena in an ironmaking blast furnace: Impacts and remedies', Powder Technology, 408, http://dx.doi.org/10.1016/j.powtec.2022.117708

Journal articles | 2022

Zhou H; Hu Y; Tian X; Kou M; Liu Y; Wu S; Shen Y, 2022, 'Numerical Simulation of Pulverized Coal Injection in the Dome Zone of a COREX Melter Gasifier', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 53, pp. 3215 - 3228, http://dx.doi.org/10.1007/s11663-022-02601-7

Journal articles | 2022

Zhou H; Tian X; Guo X; Kou M; Wu S; Shen Y; You Y, 2022, 'DEM study of the angle of repose and porosity distribution of cylindrical particles with different lengths', International Journal of Chemical Reactor Engineering, 20, pp. 197 - 207, http://dx.doi.org/10.1515/ijcre-2021-0174

Journal articles | 2022

2022, 'Valuation of guaranteed minimum maturity benefits under generalised regime-switching models using the Fourier Cosine method', Insurance: Mathematics and Economics, 105, pp. 96 - 127, http://dx.doi.org/10.1016/j.insmatheco.2022.03.012

Journal articles | 2022

Wang W; Muravey D; Shen Y; Zeng Y, 2022, 'Optimal investment and reinsurance strategies under 4/2 stochastic volatility model', Scandinavian Actuarial Journal, http://dx.doi.org/10.1080/03461238.2022.2108335

Journal articles | 2021

Chandratilleke GR; Jin X; Shen YS, 2021, 'DEM study of effects of particle size and density on mixing behaviour in a ribbon mixer', Powder Technology, 392, pp. 93 - 107, http://dx.doi.org/10.1016/j.powtec.2021.06.058

Journal articles | 2021

Chen J; Wu D; Hu Y; Shen Y; Wang G, 2021, 'Numerical Modeling of the Tuyere Surface Abrasion under Different Operating Conditions of Blast Furnace', Steel Research International, 93, http://dx.doi.org/10.1002/srin.202100591

Journal articles | 2021

Chen X; Wang C; Liu Y; Shen Y; Zheng Q; Yang S; Lu H; Zou H; Lin K; Liu H; Qiu H; Wu J; Zhang Q; Liu X, 2021, 'Popcorn-like aluminum-based powders for instant low-temperature water vapor hydrogen generation', Materials Today Energy, 19, http://dx.doi.org/10.1016/j.mtener.2020.100602

Journal articles | 2021

Cui J; Zhang Y; Hao X; Liu X; Shen Y, 2021, 'Thermodynamic calculation of S−Sb system and Cu−S−Sb system', Calphad Computer Coupling of Phase Diagrams and Thermochemistry, 75, http://dx.doi.org/10.1016/j.calphad.2021.102362

Journal articles | 2021

Li Q; Zhuo Y; Shanks K; Taylor RA; Conneely B; Tan A; Shen Y; Scott J, 2021, 'A winged solar biomass reactor for producing 5-hydroxymethylfurfural (5-HMF)', Solar Energy, 218, pp. 455 - 468, http://dx.doi.org/10.1016/j.solener.2021.03.001

Journal articles | 2021

Li S; Shen Y, 2021, 'CFD investigation of maldistribution in a full-loop circulating fluidized bed with double parallel cyclones', Powder Technology, 381, pp. 665 - 684, http://dx.doi.org/10.1016/j.powtec.2020.12.020

Journal articles | 2021

Li S; Shen Y, 2021, 'CFD study of nonuniformity of gas-solid flow through a chemical looping combustion system with symmetrical series loops', Powder Technology, 387, pp. 108 - 124, http://dx.doi.org/10.1016/j.powtec.2021.04.008

Journal articles | 2021

Li W; Zhuo Y; Bao J; Shen Y, 2021, 'A data-based soft-sensor approach to estimating raceway depth in ironmaking blast furnaces', Powder Technology, 390, pp. 529 - 538, http://dx.doi.org/10.1016/j.powtec.2021.05.072

Journal articles | 2021

Liu Y; Hu Z; Shen Y, 2021, 'CFD Study of Hydrogen Injection in Blast Furnaces: Tuyere Co-injection of Hydrogen and Coal', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 52, pp. 2971 - 2991, http://dx.doi.org/10.1007/s11663-021-02156-z

Journal articles | 2021

Liu Y; Shen Y, 2021, 'Modelling and optimisation of biomass injection in ironmaking blast furnaces', Progress in Energy and Combustion Science, 87, http://dx.doi.org/10.1016/j.pecs.2021.100952

Journal articles | 2021

Song S; Rong L; Dong K; Shen Y, 2021, 'Numerical investigation of drag property for fluid flow through random arrays of elliptical cylinders', Powder Technology, 380, pp. 539 - 552, http://dx.doi.org/10.1016/j.powtec.2020.11.003

Journal articles | 2021

Wang S; Shen Y, 2021, 'CFD-DEM modelling of raceway dynamics and coke combustion in an ironmaking blast furnace', Fuel, 302, http://dx.doi.org/10.1016/j.fuel.2021.121167

Journal articles | 2021

Wang S; Shen Y, 2021, 'Particle-scale modelling of raceway dynamics in a blast furnace using a smoothing method', Powder Technology, 389, pp. 189 - 203, http://dx.doi.org/10.1016/j.powtec.2021.05.020

Journal articles | 2021

Wang S; Shen Y, 2021, 'Particle-scale study of heat and mass transfer in a bubbling fluidised bed', Chemical Engineering Science, 240, http://dx.doi.org/10.1016/j.ces.2021.116655

Journal articles | 2021

Wang T; Wang S; Shen Y, 2021, 'Particle-scale study of gas-solid flows in a bubbling fluidised bed: Effect of drag force and collision models', Powder Technology, 384, pp. 353 - 367, http://dx.doi.org/10.1016/j.powtec.2021.02.034

Journal articles | 2021

Wong XY; Zhuo Y; Shen Y, 2021, 'Numerical Analysis of Hydrogen Bubble Behavior in a Zero-Gap Alkaline Water Electrolyzer Flow Channel', Industrial and Engineering Chemistry Research, 60, pp. 12429 - 12446, http://dx.doi.org/10.1021/acs.iecr.1c02554

Journal articles | 2021

Xie Z; Wang S; Shen Y, 2021, 'CFD-DEM modelling of the migration of fines in suspension flow through a solid packed bed', Chemical Engineering Science, 231, http://dx.doi.org/10.1016/j.ces.2020.116261

Journal articles | 2021

Xie Z; Wang S; Shen Y, 2021, 'CFD-DEM study of segregation and mixing characteristics under a bi-disperse solid-liquid fluidised bed', Advanced Powder Technology, 32, pp. 4078 - 4095, http://dx.doi.org/10.1016/j.apt.2021.09.012

Journal articles | 2021

Xiong Q; Wang J; Shen Y, 2021, 'Editorial-special issue of “advances in process intensification of fluidization”', Chemical Engineering and Processing Process Intensification, 167, http://dx.doi.org/10.1016/j.cep.2021.108557

Journal articles | 2021

Yu X; Hu Z; Shen Y, 2021, 'Modeling of hydrogen shaft injection in ironmaking blast furnaces', Fuel, 302, http://dx.doi.org/10.1016/j.fuel.2021.121092

Journal articles | 2021

Yue Y; Wang S; Bahl P; de Silva C; Shen Y, 2021, 'Experimental investigation of spout incoherence in a spouted bed', Chemical Engineering Journal, 418, http://dx.doi.org/10.1016/j.cej.2021.129320

Journal articles | 2021

Yue Y; Wang S; Shen Y, 2021, 'CFD-DEM study of mitigation of alternating spout deflection in a spout fluidized bed: A geometry perspective', Powder Technology, 394, pp. 278 - 289, http://dx.doi.org/10.1016/j.powtec.2021.08.041

Journal articles | 2021

Yue Y; Wang S; Shen Y, 2021, 'Exploring mechanism of spout deflection in a spout fluidized bed', Chemical Engineering Science, 245, http://dx.doi.org/10.1016/j.ces.2021.116942

Journal articles | 2021

Yue Y; Wang S; Shen Y, 2021, 'Gas-solid mixing and heat transfer performance in alternating spout deflection', Chemical Engineering Science, 234, http://dx.doi.org/10.1016/j.ces.2021.116446

Journal articles | 2021

Yue Y; Wang S; Shen Y, 2021, 'Spout deflection in spouted beds and countermeasures: A review', Powder Technology, 389, pp. 309 - 327, http://dx.doi.org/10.1016/j.powtec.2021.05.022

Journal articles | 2021

Yue Y; Zhang C; Shen Y, 2021, 'CFD-DEM model study of gas–solid flow in a spout fluidized bed with an umbrella-like baffle', Chemical Engineering Science, 230, http://dx.doi.org/10.1016/j.ces.2020.116234

Journal articles | 2021

Zhou H; Tian X; Kou M; Wu S; Shen Y, 2021, 'Numerical study of fine particles behaviors in a packed bed with lateral injection using CFD-DEM', Powder Technology, 392, pp. 317 - 324, http://dx.doi.org/10.1016/j.powtec.2021.07.019

Journal articles | 2021

Zhou H; Tian X; Yao S; Kou M; Wu S; Shen Y, 2021, 'Numerical analysis of blast furnace with injection of COREX export gas after removal of CO2', ISIJ International, 61, pp. 174 - 181, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2020-384

Journal articles | 2021

Zhou H; Xu K; Tian X; Kou M; Wu S; Shen Y, 2021, 'Influence of burden profile on gas-solid distribution in COREX shaft furnace with center gas supply by CFD-DEM model', Powder Technology, 392, pp. 672 - 679, http://dx.doi.org/10.1016/j.powtec.2021.07.039

Journal articles | 2021

Zhou P; Shen Y; Zhao S; Li G; Cui B; Wei D; Shen Y, 2021, 'Synthesis of clinoptilolite-supported BiOCl/TiO2 heterojunction nanocomposites with highly-enhanced photocatalytic activity for the complete degradation of xanthates under visible light', Chemical Engineering Journal, 407, http://dx.doi.org/10.1016/j.cej.2020.126697

Journal articles | 2021

Zhuo Y; Hu Z; Shen Y, 2021, 'CFD study of hydrogen injection through tuyeres into ironmaking blast furnaces', Fuel, 302, http://dx.doi.org/10.1016/j.fuel.2021.120804

Journal articles | 2021

Zhuo Y; Jung S; Shen Y, 2021, 'Numerical Study of Hydrogen Desorption in an Innovative Metal Hydride Hydrogen Storage Tank', Energy and Fuels, 35, pp. 10908 - 10917, http://dx.doi.org/10.1021/acs.energyfuels.1c00666

Journal articles | 2021

Zhuo Y; Xie Z; Shen Y, 2021, 'Model study of carbonisation of low rank coal briquettes: Effect of briquettes shape', Powder Technology, 385, pp. 120 - 130, http://dx.doi.org/10.1016/j.powtec.2021.02.071

Journal articles | 2020

Cui J; Hou Q; Shen Y, 2020, 'CFD-DEM study of coke combustion in the raceway cavity of an ironmaking blast furnace', Powder Technology, 362, pp. 539 - 549, http://dx.doi.org/10.1016/j.powtec.2019.12.012

Journal articles | 2020

Kou M; Zhou H; Wu S; Shen Y, 2020, 'Static model study on the characteristics of coke oven gas dome injection in corex melter gasifier', Archives of Metallurgy and Materials, 65, pp. 275 - 281, http://dx.doi.org/10.24425/amm.2020.131727

Journal articles | 2020

Li CX; Zhou ZY; Zou RP; Pinson D; Shen YS; Yu AB, 2020, 'Experimental and numerical investigation on the packing of binary mixtures of spheres and ellipsoids', Powder Technology, 360, pp. 1210 - 1219, http://dx.doi.org/10.1016/j.powtec.2019.10.103

Journal articles | 2020

Li S; Shen Y, 2020, 'Multi-fluid modelling of hydrodynamics in a dual circulating fluidized bed', Advanced Powder Technology, 31, pp. 2778 - 2791, http://dx.doi.org/10.1016/j.apt.2020.05.010

Journal articles | 2020

Li S; Shen Y, 2020, 'Numerical study of gas-solid flow behaviors in the air reactor of coal-direct chemical looping combustion with Geldart D particles', Powder Technology, 361, pp. 74 - 86, http://dx.doi.org/10.1016/j.powtec.2019.10.045

Journal articles | 2020

Lin CH; Lyu Z; Zhuo Y; Zhao C; Yang J; Liu C; Kim J; He T; Hu L; Li F; Shen Y; Liu K; Yu W; Wu T, 2020, 'Microwave Synthesis and High-Mobility Charge Transport of Carbon-Nanotube-in-Perovskite Single Crystals', Advanced Optical Materials, 8, http://dx.doi.org/10.1002/adom.202001740

Journal articles | 2020

Liu Y; Curtis J; Shen Y, 2020, 'Computational fluid dynamics study of re-blowin operation in an ironmaking blast furnace', Powder Technology, 361, pp. 145 - 159, http://dx.doi.org/10.1016/j.powtec.2019.09.061

Journal articles | 2020

Liu Y; Shen Y, 2020, 'Combined Experimental and Numerical Study of Charcoal Injection in a Blast Furnace: Effect of Biomass Pretreatment', Energy and Fuels, 34, pp. 827 - 841, http://dx.doi.org/10.1021/acs.energyfuels.9b02949

Journal articles | 2020

Song S; Rong L; Dong K; Liu X; Le Clech P; Shen Y, 2020, 'Particle-scale modelling of fluid velocity distribution near the particles surface in sand filtration', Water Research, 177, http://dx.doi.org/10.1016/j.watres.2020.115758

Journal articles | 2020

Wang S; Shen Y, 2020, 'CFD-DEM study of biomass gasification in a fluidized bed reactor: Effects of key operating parameters', Renewable Energy, 159, pp. 1146 - 1164, http://dx.doi.org/10.1016/j.renene.2020.06.001

Journal articles | 2020

Xie Z; Shen Y; Takabatake K; Yamaguchi A; Sakai M, 2020, 'Coarse-grained DEM study of solids sedimentation in water', Powder Technology, 361, pp. 21 - 32, http://dx.doi.org/10.1016/j.powtec.2019.11.034

Journal articles | 2020

Yu X; Shen Y, 2020, 'Computational Fluid Dynamics Study of the Thermochemical Behaviors in an Ironmaking Blast Furnace with Oxygen Enrichment Operation', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 51, pp. 1760 - 1772, http://dx.doi.org/10.1007/s11663-020-01878-w

Journal articles | 2020

Yu X; Shen Y, 2020, 'Model study of central coke charging on ironmaking blast furnace performance: Effects of charing pattern and nut coke', Powder Technology, 361, pp. 124 - 135, http://dx.doi.org/10.1016/j.powtec.2019.10.012

Journal articles | 2020

Yu X; Shen Y, 2020, 'Numerical Study of the Influence of Burden Batch Weight on Blast Furnace Performance', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 51, pp. 2079 - 2094, http://dx.doi.org/10.1007/s11663-020-01924-7

Journal articles | 2020

Yue Y; Wang S; Bahl P; De Silva C; Shen Y, 2020, 'Experimental Investigation of Spout Deflection in a Rectangular Spouted Bed by the PIV Method', Industrial and Engineering Chemistry Research, 59, pp. 13810 - 13819, http://dx.doi.org/10.1021/acs.iecr.0c02060

Journal articles | 2020

Yue Y; Wang T; Shen Y, 2020, 'CFD-DEM study of effects of particle density on spout deflection behavior in a spout fluidized bed', Powder Technology, 366, pp. 736 - 746, http://dx.doi.org/10.1016/j.powtec.2020.03.016

Journal articles | 2020

Zhang C; Li S; Wang Z; Shen Y; Wei F, 2020, 'Model and experimental study of relationship between solid fraction and back-mixing in a fluidized bed', Powder Technology, 363, pp. 146 - 151, http://dx.doi.org/10.1016/j.powtec.2019.12.053

Journal articles | 2020

Zhao S; Shen Y; Zhou P; Hao F; Xu X; Gao S; Wei D; Ao Y; Shen Y, 2020, 'Enhanced NO2 sensing performance of ZnO nanowires functionalized with ultra-fine In2O3 nanoparticles', Sensors and Actuators B Chemical, 308, http://dx.doi.org/10.1016/j.snb.2020.127729

Journal articles | 2020

Zhao Z; Yu X; Shen Y; Li Y; Xu H; Hu Z, 2020, 'Model Study of Shaft Injection of Reformed Coke Oven Gas in a Blast Furnace', Energy and Fuels, 34, pp. 15048 - 15060, http://dx.doi.org/10.1021/acs.energyfuels.0c02683

Journal articles | 2020

Zhou H; Tian X; Kou M; Wu S; Shen Y; Li Y; Shen Y, 2020, 'Numerical simulation of the effect of burden profile on gas flow in a COREX shaft furnace', Powder Technology, 376, pp. 537 - 548, http://dx.doi.org/10.1016/j.powtec.2020.08.060

Journal articles | 2020

Zhuo Y; Shen Y, 2020, 'Modelling of the pyrolysis of low-rank-coal briquettes in an industrial-scale gas heat carrier pyrolyzer', Powder Technology, 361, pp. 52 - 61, http://dx.doi.org/10.1016/j.powtec.2019.10.086

Journal articles | 2020

Zhuo Y; Shen Y, 2020, 'Three-dimensional transient modelling of coal and coke co-combustion in the dynamic raceway of ironmaking blast furnaces', Applied Energy, 261, http://dx.doi.org/10.1016/j.apenergy.2019.114456

Journal articles | 2019

Chen X; Shen Y; Zhong X; Li T; Zhao S; Zhou P; Han C; Wei D; Shen Y, 2019, 'Synthesis of ZnO nanowires/Au nanoparticles hybrid by a facile one-pot method and their enhanced NO2 sensing properties', Journal of Alloys and Compounds, 783, pp. 503 - 512, http://dx.doi.org/10.1016/j.jallcom.2019.01.001

Journal articles | 2019

Cui J; Shen Y; Liu X, 2019, 'Experimental investigation and thermodynamic modeling of the Fe−Si−Zr system', Calphad Computer Coupling of Phase Diagrams and Thermochemistry, 65, pp. 385 - 401, http://dx.doi.org/10.1016/j.calphad.2019.04.001

Journal articles | 2019

Hasan MT; Li C; Shen Y; Yu A; Yang R, 2019, 'Finite element analysis of briquetting of iron ore fines', Powder Technology, 353, pp. 398 - 408, http://dx.doi.org/10.1016/j.powtec.2019.05.026

Journal articles | 2019

Hu ZJ; Liu YR; Xu H; Zhu JM; Wu SL; Shen YS, 2019, 'Co-combustion of semicoke and coal in an industry ironmaking blast furnace: Lab experiments, model study and plant tests', Fuel Processing Technology, 196, http://dx.doi.org/10.1016/j.fuproc.2019.106165

Journal articles | 2019

Li CX; Dong KJ; Shen YS; Yu AB, 2019, 'Particle conveying under microgravity in a vibrating vessel', Advanced Powder Technology, 30, pp. 3163 - 3170, http://dx.doi.org/10.1016/j.apt.2019.09.025

Journal articles | 2019

Liu Y; Shen Y, 2019, 'CFD study of charcoal combustion in a simulated ironmaking blast furnace', Fuel Processing Technology, 191, pp. 152 - 167, http://dx.doi.org/10.1016/j.fuproc.2019.04.004

Journal articles | 2019

Liu Y; Shen Y, 2019, 'Three-dimensional modelling of charcoal combustion in an industrial scale blast furnace', Fuel, 258, http://dx.doi.org/10.1016/j.fuel.2019.116088

Journal articles | 2019

Xie Z; An X; Yang X; Li C; Shen Y, 2019, 'Numerical realization and structure characterization on random close packings of cuboid particles with different aspect ratios', Powder Technology, 344, pp. 514 - 524, http://dx.doi.org/10.1016/j.powtec.2018.12.017

Journal articles | 2019

Yu X; Shen Y, 2019, 'Computational Fluid Dynamics Study of the Flow and Thermochemical Behaviors of a Carbon Composite Briquette in an Ironmaking Blast Furnace', Energy and Fuels, 33, pp. 11603 - 11616, http://dx.doi.org/10.1021/acs.energyfuels.9b02954

Journal articles | 2019

Yu X; Shen Y, 2019, 'Model Study of Blast Furnace Operation with Central Coke Charging', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 50, pp. 2238 - 2250, http://dx.doi.org/10.1007/s11663-019-01657-2

Journal articles | 2019

Yu X; Shen Y, 2019, 'Model analysis of gas residence time in an ironmaking blast furnace', Chemical Engineering Science, 199, pp. 50 - 63, http://dx.doi.org/10.1016/j.ces.2018.12.062

Journal articles | 2019

Yue Y; Shen Y, 2019, 'Particle-Scale Study of the Effect of Operating Conditions on Spout Deflection Behavior in a Flat-Bottomed Spout-Fluidized Bed', Industrial and Engineering Chemistry Research, 58, pp. 23445 - 23457, http://dx.doi.org/10.1021/acs.iecr.9b05225

Journal articles | 2019

Yue Y; Wang T; Sakai M; Shen Y, 2019, 'Particle-scale study of spout deflection in a flat-bottomed spout fluidized bed', Chemical Engineering Science, 205, pp. 121 - 133, http://dx.doi.org/10.1016/j.ces.2019.04.031

Journal articles | 2019

Zhuo Y; Li C; Wu C; Shen Y, 2019, 'A combined numerical and experimental approach to study the carbonization of low-rank coal ellipsoidal briquettes', Chemical Engineering Science, 204, pp. 76 - 90, http://dx.doi.org/10.1016/j.ces.2019.04.019

Journal articles | 2018

Chandratilleke GR; Dong KJ; Shen YS, 2018, 'DEM study of the effect of blade-support spokes on mixing performance in a ribbon mixer', Powder Technology, 326, pp. 123 - 136, http://dx.doi.org/10.1016/j.powtec.2017.12.055

Journal articles | 2018

Chen X; Shen Y; Zhang W; Zhang J; Wei D; Lu R; Zhu L; Li H; Shen Y, 2018, 'In-situ growth of ZnO nanowire arrays on the sensing electrode via a facile hydrothermal route for high-performance NO 2 sensor', Applied Surface Science, 435, pp. 1096 - 1104, http://dx.doi.org/10.1016/j.apsusc.2017.11.222

Journal articles | 2018

Fan K; Shen Y; Siu TK; Wang R, 2018, 'Pricing dynamic fund protection under hidden Markov models', IMA Journal of Management Mathematics, 29, pp. 99 - 117, http://dx.doi.org/10.1093/imaman/dpw014

Journal articles | 2018

Gao Q; Shen Y; Wei G; Shen F, 2018, 'Reduction kinetics behavior of FeO-CaO-SiO2-MgO-Al2O3 molten slag using solid-carbon', Archives of Metallurgy and Materials, 63, pp. 257 - 263, http://dx.doi.org/10.24425/118936

Journal articles | 2018

He Y; Evans TJ; Shen YS; Yu AB; Yang RY, 2018, 'Discrete modelling of the compaction of non-spherical particles using a multi-sphere approach', Minerals Engineering, 117, pp. 108 - 116, http://dx.doi.org/10.1016/j.mineng.2017.12.013

Journal articles | 2018

Li T; Shen Y; Zhao S; Chen X; Li G; Lu R; Zhu L; Li H; Wei D; Shen Y, 2018, 'Xanthate sensing properties of Pt-functionalized WO3 microspheres synthesized by one-pot hydrothermal method', Ceramics International, 44, pp. 4814 - 4823, http://dx.doi.org/10.1016/j.ceramint.2017.12.069

Journal articles | 2018

Liu Y; Shen Y, 2018, 'Computational Fluid Dynamics Study of Biomass Combustion in a Simulated Ironmaking Blast Furnace: Effect of the Particle Shape', Energy and Fuels, 32, pp. 4372 - 4381, http://dx.doi.org/10.1021/acs.energyfuels.7b03150

Journal articles | 2018

Ratnayake P; Chandratilleke R; Bao J; Shen Y, 2018, 'A soft-sensor approach to mixing rate determination in powder mixers', Powder Technology, 336, pp. 493 - 505, http://dx.doi.org/10.1016/j.powtec.2018.06.022

Journal articles | 2018

Sun K; Liu F; Huang J; Yan C; Song N; Sun H; Xue C; Zhang Y; Pu A; Shen Y; Stride JA; Green M; Hao X, 2018, 'Flexible kesterite Cu2ZnSnS4 solar cells with sodium-doped molybdenum back contacts on stainless steel substrates', Solar Energy Materials and Solar Cells, 182, pp. 14 - 20, http://dx.doi.org/10.1016/j.solmat.2018.02.036

Journal articles | 2018

Wu YL; Jiang ZY; Zhang XX; Xue QG; Miao Z; Zhou Z; Shen YS, 2018, 'Process optimization of metallurgical dust recycling by direct reduction in rotary hearth furnace', Powder Technology, 326, pp. 101 - 113, http://dx.doi.org/10.1016/j.powtec.2017.12.063

Journal articles | 2018

Yu X; Shen Y, 2018, 'Modelling of Blast Furnace with Respective Chemical Reactions in Coke and Ore Burden Layers', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 49, pp. 2370 - 2388, http://dx.doi.org/10.1007/s11663-018-1332-6

Journal articles | 2018

Zhao S; Shen Y; Zhou P; Zhang J; Zhang W; Chen X; Wei D; Fang P; Shen Y, 2018, 'Highly selective NO2 sensor based on p-type nanocrystalline NiO thin films prepared by sol–gel dip coating', Ceramics International, 44, pp. 753 - 759, http://dx.doi.org/10.1016/j.ceramint.2017.09.243

Journal articles | 2018

Zhou H; Wu S; Kou M; Lu Z-G; Zou Z-S; Shen Y, 2018, 'Analysis of Cohesive Particle Percolation in a Packed Bed Using Discrete Element Method', ISIJ INTERNATIONAL, 58, pp. 43 - 51, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-373

Journal articles | 2018

Zhou H; Wu S; Kou M; Luo Z; He W; Zou Z; Shen Y, 2018, 'Discrete particle simulation of solid flow in a large-scale reduction shaft furnace with center gas supply device', ISIJ International, 58, pp. 422 - 430, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-545

Journal articles | 2018

Zhou H; Wu S; Kou M; Luo ZG; Zou ZS; Shen Y, 2018, 'Analysis of cohesive particle percolation in a packed bed using discrete element method', ISIJ International, 58, pp. 43 - 51, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-373

Journal articles | 2018

Zhou H; Wu S; Kou M; Yao S; Shen Y, 2018, 'Analysis of coke oven gas injection from dome in COREX melter gasifier for adjusting dome temperature', Metals, 8, http://dx.doi.org/10.3390/met8110921

Journal articles | 2018

Zhuo Y; Wang T; Li C; Shen Y, 2018, 'Numerical Study of the Pyrolysis of Ellipsoidal Low-Rank Coal Briquettes', Energy and Fuels, 32, pp. 4189 - 4201, http://dx.doi.org/10.1021/acs.energyfuels.7b03224

Journal articles | 2017

Gao QJ; Wei G; Shen YS; Jiang X; Zheng HY; Shen FM; Liu CS, 2017, 'Influence and mechanism of Indonesia vanadium titano-magnetite on metallurgical properties of iron ore sinter', Journal of Central South University, 24, pp. 2805 - 2812, http://dx.doi.org/10.1007/s11771-017-3695-2

Journal articles | 2017

Liao J; Yu AB; Shen Y, 2017, 'Modelling the injection of upgraded brown coals in an ironmaking blast furnace', Powder Technology, 314, pp. 550 - 556, http://dx.doi.org/10.1016/j.powtec.2016.11.005

Journal articles | 2017

Liu F; Huang J; Sun K; Yan C; Shen Y; Park J; Pu A; Zhou F; Liu X; Stride JA; Green MA; Hao X, 2017, 'Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact', NPG Asia Mater, 9, pp. e401, http://dx.doi.org/10.1038/am.2017.103

Journal articles | 2017

Liu Y; Zhang J; Xing X; Liu Z; Li X; Li N; Shen Y, 2017, 'Synthesis and non-isothermal carbothermic reduction of FeTiO3-Fe2O3 solid solution systems', Metallurgical and Materials Transactions B

Journal articles | 2017

Luo ZG; Zhou H; Zhang T; You Y; Zhang LJ; Zou ZS; Shen YS, 2017, 'DEM study of blockage behaviour of cohesive fine particles in a packed structure of large particles', Powder Technology, 314, pp. 102 - 109, http://dx.doi.org/10.1016/j.powtec.2016.08.053

Journal articles | 2017

Meng F; Gupta S; French D; Koshy P; Sorrell C; Shen Y, 2017, 'Characterization of microstructure and strength of coke particles and their dependence on coal properties', Powder Technology, 320, pp. 249 - 256, http://dx.doi.org/10.1016/j.powtec.2017.07.046

Journal articles | 2017

Meng F; Gupta S; Yu J; Jiang Y; Koshy P; Sorrell C; Shen Y, 2017, 'Effects of kaolinite addition on the thermoplastic behaviour of coking coal during low temperature pyrolysis', Fuel Processing Technology, 167, pp. 502 - 510, http://dx.doi.org/10.1016/j.fuproc.2017.08.005

Journal articles | 2017

Miao Z; Zhou Z; Yu AB; Shen Y, 2017, 'CFD-DEM simulation of raceway formation in an ironmaking blast furnace', Powder Technology, 314, pp. 542 - 549, http://dx.doi.org/10.1016/j.powtec.2016.11.039

Journal articles | 2017

Wu YL; Jiang Z; Zhang X; Xue Q; Yu A; Shen Y, 2017, 'Modelling of Thermochemical Behaviour in An Industrial-Scale Rotary Hearth Furnace for Metallurgical Dust Recycling', Metallurgical and Materials Transactions B

Journal articles | 2017

Xu J; Yu S; Wang N; Chen M; Shen Y, 2017, 'Characterization of high-turbulence zone in slowly moving bed slagging coal gasifier by a 3D mathematical model', Powder Technology, 314, pp. 524 - 531, http://dx.doi.org/10.1016/j.powtec.2016.10.022

Journal articles | 2017

Zhao H; Weng CG; Shen Y; Zeng Y, 2017, 'Time-consistent investment-reinsurance strategies towards joint interests of the insurer and the reinsurer under CEV models', Science China Mathematics, 60, pp. 317 - 344, http://dx.doi.org/10.1007/s11425-015-0542-7

Journal articles | 2017

Zhou H; Wu S; Kou M; Tang B; Cheng H; Zhang Y; Shen Y, 2017, 'Solid Flow in a Shaft Furnace in Smelting Reduction Process under Circumferential Imbalance Conditions', Steel Research International, 88, http://dx.doi.org/10.1002/srin.201700212

Journal articles | 2016

GAO QJ; SHEN YS; JIANG X; ZHENG HY; SHEN FM; LIU CS, 2016, 'Effect of MgO on Oxidation Process of Fe3O4 in Pellets', Journal of Iron and Steel Research International, 23, pp. 1007 - 1011, http://dx.doi.org/10.1016/S1006-706X(16)30151-0

Journal articles | 2016

Gao QJ; Shen YS; Wei G; Jiang X; Shen FM, 2016, 'Diffusion behavior and distribution regulation of MgO in MgO-bearing pellets', International Journal of Minerals Metallurgy and Materials, 23, pp. 1011 - 1018, http://dx.doi.org/10.1007/s12613-016-1318-9

Journal articles | 2016

Shen Y; Guo B; Chew S; Austin P; Yu A, 2016, 'Modeling of Internal State and Performance of an Ironmaking Blast Furnace: Slot vs Sector Geometries', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 47, pp. 1052 - 1062, http://dx.doi.org/10.1007/s11663-015-0557-x

Journal articles | 2016

Shen YS; Yu AB, 2016, 'Modelling of injecting a ternary coal blend into a model ironmaking blast furnace', Minerals Engineering, 90, pp. 89 - 95, http://dx.doi.org/10.1016/j.mineng.2015.12.009

Journal articles | 2016

Sun K; Liu F; Yan C; Zhou F; Huang J; Shen Y; Liu R; Hao X, 2016, 'Influence of sodium incorporation on kesterite Cu2ZnSnS4 solar cells fabricated on stainless steel substrates', Solar Energy Materials and Solar Cells, 157, pp. 565 - 571, http://dx.doi.org/10.1016/j.solmat.2016.07.036

Journal articles | 2016

Zhao H; Shen Y; Zeng Y, 2016, 'Time-consistent investment-reinsurance strategy for mean-variance insurers with a defaultable security', Journal of Mathematical Analysis and Applications, 437, pp. 1036 - 1057, http://dx.doi.org/10.1016/j.jmaa.2016.01.035

Journal articles | 2016

Zhou H; Luo ZG; Zhang T; You Y; Zou ZS; Shen Y, 2016, 'DEM study of solid flow in COREX shaft furnace with Areal Gas Distribution beams', ISIJ International, 56, pp. 245 - 254, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2015-540

Journal articles | 2015

Shen F; Gao Q; Wei G; Jiang X; Shen Y, 2015, 'Densification Process of MgO Bearing Pellets', Steel Research International, 86, pp. 644 - 650, http://dx.doi.org/10.1002/srin.201400372

Journal articles | 2015

Shen Y; Guo B; Chew S; Austin P; Yu A, 2015, 'Three-Dimensional Modeling of Flow and Thermochemical Behavior in a Blast Furnace', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 46, pp. 432 - 448, http://dx.doi.org/10.1007/s11663-014-0204-y

Journal articles | 2015

Shen Y; Wang W; Fan A; Wei D; Liu W; Han C; Shen Y; Meng D; San X, 2015, 'Highly sensitive hydrogen sensors based on SnO2 nanomaterials with different morphologies', International Journal of Hydrogen Energy, 40, pp. 15773 - 15779, http://dx.doi.org/10.1016/j.ijhydene.2015.09.077

Journal articles | 2015

Shen Y; Yu A, 2015, 'Characterization of Coal Burnout in the Raceway of an Ironmaking Blast Furnace', Steel Research International, 86, pp. 604 - 611, http://dx.doi.org/10.1002/srin.201400333

Journal articles | 2015

Sun Y; Zheng H; Dong Y; Jiang X; Shen Y; Shen F, 2015, 'Melting and separation behavior of slag and metal phases in metallized pellets obtained from the direct-reduction process of vanadium-bearing titanomagnetite', International Journal of Mineral Processing, 142, pp. 119 - 124, http://dx.doi.org/10.1016/j.minpro.2015.04.002

Journal articles | 2015

Yu A; Shen Y, 2015, 'Iron and Steel Making in Australia and China - Special Issue for the 2nd Australia-China Joint Symposium of Minerals and Metallurgy', Steel Research International, 86, pp. 591, http://dx.doi.org/10.1002/srin.201500139

Journal articles | 2015

2015, 'Valuing commodity options and futures options with changing economic conditions', Economic Modelling, 51, pp. 524 - 533, http://dx.doi.org/10.1016/j.econmod.2015.09.006

Journal articles | 2014

Rangarajan D; Shiozawa T; Shen Y; Curtis JS; Yu A, 2014, 'Influence of operating parameters on raceway properties in a model blast furnace using a two-fluid model', Industrial and Engineering Chemistry Research, 53, pp. 4983 - 4990, http://dx.doi.org/10.1021/ie301936r

Journal articles | 2014

Shen Y; Fan K; Siu TK, 2014, 'Option Valuation Under a Double Regime-Switching Model', Journal of Futures Markets, 34, pp. 451 - 478

Journal articles | 2014

Shen Y; Shiozawa T; Austin P; Yu A, 2014, 'Model study of the effect of bird's nest on transport phenomena in the raceway of an ironmaking blast furnace', Minerals Engineering, 63, pp. 91 - 99, http://dx.doi.org/10.1016/j.mineng.2014.01.008

Journal articles | 2014

Sun K; Su Z; Yan C; Liu F; Cui H; Jiang L; Shen Y; Hao X; Liu Y, 2014, 'Flexible Cu2ZnSnS4 solar cells based on successive ionic layer adsorption and reaction method', Rsc Advances, 4, pp. 17703 - 17708, http://dx.doi.org/10.1039/c3ra47823h

Journal articles | 2013

Shen Y; Siu TK, 2013, 'Pricing bond options under a Markovian regime-switching Hull–White model', Economic Modelling, 30, pp. 933 - 940

Journal articles | 2013

Shen Y; Siu TK, 2013, 'Pricing variance swaps under a stochastic interest rate and volatility model with regime-switching', Operations Research Letters, 41

Journal articles | 2013

Shen Y; Siu TK, 2013, 'The maximum principle for a jump-diffusion mean-field model and its application to the mean–variance problem', Nonlinear Analysis: Theory, Methods & Applications, 86, pp. 58 - 73

Journal articles | 2012

Shen Y; Guo B; Austin P; Chew S; Yu A, 2012, 'Modelling of ironmaking blast furnace: Comparison of slot and sector geometries', 6th Int Congress on the Science and Technology of Ironmaking 2012 Icsti 2012 Including Proceedings from the 42nd Ironmaking and Raw Materials Seminar and the 13th Brazilian Symp on Iron Ore, 1, pp. 1 - 12

Journal articles | 2012

Yu ABOYAOYA-B; Austin P; Zulli P; Shen Y, 2012, 'Modelling in-furnace phenomena of pulverized coal injection in ironmaking blast furnace: Effect of coke bed porosities', Minerals Engineering, 33, pp. 54 - 65, http://dx.doi.org/10.1016/j.mineng.2011.10.014

Journal articles | 2011

Shen Y; Yu A; Zulli P, 2011, 'CFD modeling and applications of pulverized coal injection in blast furnace', Aistech Iron and Steel Technology Conference Proceedings, pp. 495 - 505

Journal articles | 2011

Shen Y; Yu ABOYAOYA-B; Austin P; Zulli P, 2011, 'CFD study of in-furnace phenomena of pyulverized coal injection in blast furnace: effects of operating conditions', Powder Technology, 223, pp. 27 - 38, http://dx.doi.org/10.1016

Journal articles | 2011

Shen Y; Yu ABOYAOYA-B; Zulli P, 2011, 'CFD modelling and analysis of pulverized coal injection in blast furnace: An overview', Steel Research International, 82, pp. 532 - 542, http://dx.doi.org/10.1002/srin.201100045

Journal articles | 2011

Shen Y; Yu ABOYAOYA-B, 2011, 'Guest editorial letter for the special issues for Australia-China-Japan joint conference on Iron and Steel Making', Steel Research International, 82, pp. 465 - 465, http://dx.doi.org/10.1002/srin.201100043

Journal articles | 2011

Zatryb G; Podhorodecki A; Hao X; Misiewicz J; Shen Y; Green MA, 2011, 'Correlation between stress and carrier nonradiative recombination for silicon nanocrystals in an oxide matrix', Nanotechnology, 22, pp. 335703, http://dx.doi.org/10.1088/0957-4484/22/33/335703

Journal articles | 2010

Zatryb G; Podhorodecki A; Hao X; Shen Y; Green MA, 2010, 'Quantitative evaluation of boron-induced disorder in multilayers containing silicon nanocrystals in an oxide matrix designed for photovoltaic applications', Optics Express, 18, pp. 22004 - 22009, http://dx.doi.org/10.1364/OE.18.022004

Journal articles | 2009

Guo B; Paul Z; Daniel M; Yu AB; Shen Y, 2009, 'Modelling of Titanium Compound Formation in Blast Furnace Hearth', Journal of Iron and Steel Research International, 16, pp. 851 - 856

Journal articles | 2009

Hao X; Cho EC; Flynn CR; Shen Y; Park S; Conibeer GJ; Green MA, 2009, 'Synthesis and characterization of boron-doped Si quantum dots for all-Si quantum dot tandem solar cells', Solar Energy Materials and Solar Cells, 93, pp. 273 - 279

Journal articles | 2009

Hao X; Cho EC; Scardera G; Bellet-Amalric E; Bellet D; Shen Y; Huang S; Huang Y; Conibeer GJ; Green MA, 2009, 'Effects of phosphorus doping on structural and optical properties of silicon nanocrystals in a SiO2 matrix', Thin Solid Films, 517, pp. 5646 - 5652, http://dx.doi.org/10.1016/j.tsf.2009.02.076

Journal articles | 2009

Hao X; Cho EC; Scardera G; Shen Y; Bellet-Amalric E; Bellet D; Conibeer GJ; Green MA, 2009, 'Phosphorus-doped silicon quantum dots for all-silicon quantum dot tandem solar cells', Solar Energy Materials and Solar Cells, 93, pp. 1524 - 1530

Journal articles | 2009

Hao X; Podhorodecki AP; Shen Y; Zatryb G; Misiewicz G; Green MA, 2009, 'Effects of Si-rich oxide layer stoichiometry on the structural and optical properties of Si QD/SiO2 multilayer films', Nanotechnology, 20, pp. 485703 - 485713

Journal articles | 2009

Jiang X; Zhang L; Li GS; Jin MF; Wang Z; Shen YS; Shen FM, 2009, 'Influence of MgO addition on sinter strength of blast furnace', 5th International Congress on the Science and Technology of Ironmaking Icsti 2009, pp. 253 - 257

Journal articles | 2009

Shen FM; Ding ZM; Yang WG; Jiang X; Mu L; Shen YS, 2009, 'An industrial investigation of Bi-PCI process in a blast furnace', 5th International Congress on the Science and Technology of Ironmaking Icsti 2009, pp. 753 - 757

Journal articles | 2009

Shen Y; Guo B; Yu A; Zulli P, 2009, 'A three-dimensional numerical study of the combustion of coal blends in blast furnace', Fuel, the science and technology of fuel and energy, 88, pp. 255 - 263

Journal articles | 2009

Shen Y; Guo B; Yu AB; Peter A; Paul Z, 2009, 'Modelling in-Furnace Phenomena of Coal/Coke Combustion in a Blast Furnace: Effects of Coal Properties', Journal of Iron and Steel Research International, 16, pp. 1137 - 1142

Journal articles | 2009

Shen Y; Guo B; Yu AB; Zulli P, 2009, 'Model Study of the Effects of Coal Properties and Blast Conditions on Pulverized Coal Combustion', ISIJ International, 49, pp. 819 - 826, http://www.jstage.jst.go.jp/article/isijinternational/49/6/819/_pdf

Journal articles | 2009

Yu A; Shen Y; Guo B; Austin P; Maldonado D; Zulli P, 2009, 'Computational Fluid Dynamics Study of Pulverized Coal Combustion in Blast Furnace Raceway', Industrial and Engineering Chemistry Research, 48, pp. 10314 - 10323, http://dx.doi.org/10.1021/ie900853d

Journal articles | 2008

Hao X; Cho EC; Flynn CR; Shen Y; Conibeeer G; Green MA, 2008, 'Effects of boron doping on the structural and optical properties of silicon nanocrystals in a silicon dioxide matrix', Materials Forum, 19, pp. 424019

Journal articles | 2008

Hao X; Cho EC; Flynn CR; Shen Y; Conibeer GJ; Green MA, 2008, 'Effects of boron doping on the structural and optical properties of silicon nanocrystals in a silicon dioxide matrix', Nanotechnology, 19

Journal articles | 2008

Shen F; Sundelin B; Paulsson K; Kapilashrami E; Wei G; Chu M; Shen Y, 2008, 'Industrial practice of BiPCI process of pulverized coal injection for blast furnace ironmaking at SSAB', Steel Research International, 79, pp. 11 - 16, http://dx.doi.org/10.1002/srin.200806310

Journal articles | 2008

Shen F; Sundelin B; Paulsson K; Kapilashrami E; Wei G; Chu MS; Shen Y, 2008, 'Practice of BiPCI Process of Pulverized Coal Injection for Blast Furnace Ironmaking at SSAB', Steel Research International, 79, pp. 11 - 16

Journal articles | 2008

Shen Y; Guo B; Yu A; Maldonado D; Zulli P; Austin P, 2008, 'Three-dimensional modelling of coal combustion in blast furnace', ISIJ International, 48, pp. 777 - 786

Journal articles | 2006

Shen F; Jiang X; Wu G; Wei G; Li X; Shen Y, 2006, 'Proper MgO addition in blast furnace operation', ISIJ International, 46, pp. 65 - 69, http://dx.doi.org/10.2355/isijinternational.46.65

Journal articles | 2006

Ying ZW; Xu LX; Jiang MF; Shen Y, 2006, 'Effect of Calcium Ferrite Morphology on Anti-Fracture Ability of Sinters', Journal of Iron and Steel Research International, 18, pp. 55 - 58

Journal articles | 2005

Shen Y; Shen F; Du GG; Hao X; Xie Z, 2005, 'A blast furnace prediction model combining neural network with partial least square regression', Steel Research International, 76, pp. 694 - 699

Journal articles | 2005

Wei G; Shen F; Shen Y; Hao X; Zhao Q, 2005, 'Development of non Coke ironmaking Processess in China', Steel Research International, 76, pp. 683 - 685

Journal articles | 2004

Shen F; Dai SH; Wang XM; Liu BC; Shen Y; Yu A, 2004, 'Metallurgical Properties of Zinc-bearing EAF Dust-Coal Composite Pellet', CAMP-ISIJ Conference, 17, pp. 684 - 687

Journal articles | 2002

Shen F; Zhu M; Shen Y, 2002, 'Development of bisegment pulverized coal injection into blast furnace as a new process', Kang T Ieh Iron and Steel Peking, 37, pp. 5 - 22
Conference Papers | 2025

Gan M; Liu Y; Shen Y, 2025, 'A Novel Technology of Co-injecting Hydrogen and Biomass (CoHB) in Blast Furnaces for a Sustainable Carbon-Neutral Ironmaking', in Proceedings Icsti 2025 10th International Congress on the Science and Technology of Ironmaking, pp. 1087 - 1091

Conference Papers | 2025

Kang P; Xu D; Shen Y, 2025, 'How Hydrogen Injection Impacts Raceway Reacting Flow in An Ironmaking Blast Furnace: An Industrial-Scale CFD-DEM Study', in Proceedings Icsti 2025 10th International Congress on the Science and Technology of Ironmaking, pp. 682 - 687

Conference Papers | 2025

Si Y; Zeng W; Ren S; Shen Y; Zhou H; Zhao B; Kou M, 2025, 'Smelting Characteristics of Raceway Under Ammonia and Pulverized-Coal Co-Injection Condition in a Blast Furnace', in Proceedings Icsti 2025 10th International Congress on the Science and Technology of Ironmaking, pp. 1097 - 1101

Conference Papers | 2025

Xie J; Yu X; Shen Y, 2025, 'Three-Dimensional Transient Numerical Investigation on Effects of Non-Uniform Blast Temperature on a Blast Furnace', in Proceedings Icsti 2025 10th International Congress on the Science and Technology of Ironmaking, pp. 580 - 584

Conference Papers | 2025

Zhao Z; Yu X; Shen Y, 2025, 'A Virtual Experiment to Assessing Ferro-Coke Utilization in Blast Furnaces', in Proceedings Icsti 2025 10th International Congress on the Science and Technology of Ironmaking, pp. 599 - 601

Conference Papers | 2022

Fan Q; Shen Y; Evans T, 2022, 'The Development of Multi-Zone Model for Refining Dynamics of Decarburization and Dephosphorization in BOF Oxygen Steelmaking', in 8th International Congress on the Science and Technology of Steelmaking Ics 2022, pp. 232 - 240, http://dx.doi.org/10.33313/531/033

Conference Papers | 2017

Shen Y, 2017, 'CFD-DEM study of flow and thermochemical behaviour of the raceway', in CFD-DEM study of flow and thermochemical behaviour of the raceway, SteelSim 2017, Qingdao, China, presented at SteelSim 2017, Qingdao, China, 16 August 2017 - 18 August 2017

Conference Papers | 2017

Shen Y, 2017, 'DEM study of particle blockage', in Proc. of Annual Conference of Ironmaking 2016, Annual Conference of Ironmaking 2016, Kunming, presented at Annual Conference of Ironmaking 2016, Kunming, 07 May 2017 - 10 May 2017

Conference Papers | 2016

Shen Y, 2016, 'CFD study of gas solid flow in the raceway in blast furnace', in Proc. of Australia-China-Japan Joint Symposium, Australia-China-Japan Joint Symposium, Melbourne, presented at Australia-China-Japan Joint Symposium, Melbourne, 23 November 2016 - 26 November 2016

Conference Papers | 2016

Shen Y, 2016, 'Model study of burden distribution in blast furnace'

Conference Papers | 2015

Shen KM; Wen QL; Jiang X; Zheng HY; Gao QJ; Hu YP; Wei G; Shen YS; Wang L, 2015, 'Proper methods of adding MgO-bearing flux in blast furnace process', in Aistech Iron and Steel Technology Conference Proceedings, pp. 988 - 1000

Conference Papers | 2015

Zheng H; Shen F; Wen X; Jiang X; Wei G; Shen Y, 2015, 'Theoretical analysis of Al2O3 behaviors in blast furnace ironmaking and proper MgO/Al2O3 ratio in slag', in Aistech Iron and Steel Technology Conference Proceedings, pp. 703 - 712

Conference Papers | 2013

Luo Z; Liu C; Zhang T; Sun J; Zou Z; Shen Y, 2013, 'Comparison of two methods to study the gas-liquid flows in a continuous slab casting mold', in Aip Conference Proceedings, pp. 1296 - 1299, http://dx.doi.org/10.1063/1.4812177

Conference Papers | 2013

Shen Y; Guo B; Chew S; Austin P; Yu A, 2013, 'A 3D CFD simulation of liquid flow in an ironmaking blast furnace', in Aip Conference Proceedings, pp. 555 - 563, http://dx.doi.org/10.1063/1.4816908

Conference Papers | 2013

Shen Y; Guo B; Yu A; Chew S; Austin P, 2013, 'Modelling ironmaking blast furnace: Solid flow and thermochemical behaviours', in Aip Conference Proceedings, pp. 1274 - 1277, http://dx.doi.org/10.1063/1.4812171

Conference Papers | 2013

Shen Y; Shiozawa T; Yu A; Austin P, 2013, 'Modelling the combustion of charcoal in a model blast furnace', in Aip Conference Proceedings, pp. 78 - 87, http://dx.doi.org/10.1063/1.4816855

Conference Papers | 2013

Shen Y; Yu A; Zulli P, 2013, 'Compare pilot-scale and industry-scale models of pulverized coal combustion in an ironmaking blast furnace', in Aip Conference Proceedings, pp. 564 - 571, http://dx.doi.org/10.1063/1.4816909

Conference Papers | 2013

Sun JJ; Luo ZG; Di ZX; Liu CL; Zou ZS; Shen YS, 2013, 'Study of raceway in COREX melter gasifier by using three progressive methods', in Aip Conference Proceedings, pp. 1158 - 1161, http://dx.doi.org/10.1063/1.4812142

Conference Papers | 2011

Shen Y; Shiozawa T; Yu ABOYAOYA-B, 2011, 'CFD modelling and analysis of the combustion of ternary coal blends', in Minerals Engineering, Pergamon-Elsevier Science Ltd, Kidlington, Oxford, England, presented at Computational Modelling '11, Falmouth, UK

Conference Papers | 2011

Shen Y; Yu ABOYAOYA-B, 2011, 'CFD modelling of pulverized coal injection in ironmaking blast furnace: effect of key operating conditions', in Minerals Engineering, Pergamon-Elsevier Science Ltd, Kidlington, Oxford, England, presented at Computational Modelling '11, Falmouth, UK

Conference Papers | 2010

Shen Y; Yu ABOYAOYA-B; Austin P; Zulli P, 2010, '3-D model study of coal/coke combustion in a blast furnace: effects of coal properties', in Proceedings of 4th Baosteel Biennial Academic Conference, XU Leijiang, Baosteel, Shanghai, China, presented at 4th Baosteel Biennial Academic Conference, Shanghai, China, 16 November 2010 - 18 November 2010, http://en.cnki.com.cn/Article_en/CJFDTotal-BSTR2010S1029.htm

Conference Papers | 2010

Shen Y; Yu ABOYAOYA-B; Austin P, 2010, 'Three-dimensional modelling of in-furnace coal/coke combustion in a blast furnace: effects of operating conditions', in Proceedings of Chemeca 2010: The 40th Annual Australasian Chemical and Process Engineering Conference, Engineers Australia, Australia, pp. 358 - 368, presented at Chemeca 2010, Adelaide, 26 September 2010 - 29 September 2010, http://search.informit.com.au/fullText;dn=968226066638206;res=IELENG

Conference Papers | 2009

Yu A; Guo B; Shen Y; Zulli P; Maldonado D, 2009, 'Modeling solid precipitation in blast furnace hearth', in Modeling solid precipitation in blast furnace hearth, Xian, China, presented at 6th International Symposium on Multiphase Flow, heat Mass transfer and Energy Conversion, Xian, China, 11 July 2009 - 15 July 2009

Conference Papers | 2009

Yu A; Shen Y; Guo B; Austin P; Zulli P, 2009, 'An integrated Model of Coal/Coke Combustion in a Blast Furnace', in AIP Conference Proceedings, American Institute of Physics, Melvile, NY 11747 USA, presented at 6th International Symposium on Multiphase Flow, heat Mass transfer and Energy Conversion, Xian, China, 11 July 2009 - 15 July 2009

Conference Papers | 2008

Hao X; Cho EC; Park S; Shen Y; Conibeeer G; Green MA, 2008, 'Study on Boron Doped Silicon Quantum Dots Superlattices for All-Silicon Tandem Solar Cells', in COMMAD: 2008 CONFERENCE ON OPTOELECTRONIC AND MICROELECTRONIC MATERIALS& DEVICES, Ieee, New York

Conference Papers | 2008

Shen Y; Guo B; Yu A; Zulli P, 2008, 'CFD Model of Coal Blends Combustion and Effects of some Parameters', in Chemeca 2008 Towards a Sustainable Australasia, Newcastle, NSW, presented at Chemeca 2008 Towards a Sustainable Australasia, Newcastle, NSW, 28 September 2008 - 01 October 2008

Conference Papers | 2007

Yu A; Rahman M; Zhu H; Bridgwater J, 2007, 'DEM Simulation of Particle Percolation in a Packed Bed', in Discrete Element Methods 07, Brisbane, Qld, presented at Discrete Element Methods 07, Brisbane, Qld, 27 August 2007 - 29 August 2007

Conference Papers | 2006

Yu A; Guo B; Shen Y; maldonado D; Zulli P, 2006, 'Application of a Numerical Model in the Design of Blast Parameters for an Ironmaking Blast Furnace', in 5th International Conference on CFD in the Process Industries, CSIRO, Melbourne, Australia, presented at 5th International Conference on CFD in the Process Industries, CSIRO, Melbourne, Australia, 13 December 2006 - 15 December 2006

Conference Papers | 2006

Yu A; Guo B; Zulli P; maldonado D; Shen Y, 2006, 'Combustion Behaviour of Pulverised Coal Injection in Blast Furnace', in 5th International Conference on CFD in the Process Industries, CSIRO, Melbourne, Australia, presented at 5th International Conference on CFD in the Process Industries, CSIRO, Melbourne, Australia, 13 December 2006 - 15 December 2006

Conference Papers | 2006

Yu A; Shen Y; Guo B; Zulli P, 2006, 'Three-Dimensional Simulation of Combustion Behaviour of Pulverised Coal Injection in A Blast Furnace', in 13th International Heat Transfer Conference, Sydney, presented at 13th International Heat Transfer Conference, Sydney, 13 August 2006 - 18 August 2006

Conference Papers | 1998

Lee ML; Xin B; Lippert JA; Bowerbank CR; Wu N; Shen Y, 1998, 'Unified chromatography for fast separations', in ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, AMER CHEMICAL SOC, pp. U193 - U193, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000075234900527&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Conference Papers | 1995

Guo X; Hurn J; Lower J; Mazevet S; Shen Y; McCarthy IE; Weigold E, 1995, 'Spin effects in (e,2e) collisions', in Dube LJ; Mitchell JBA; McConkey JW; Brion CE (eds.), PHYSICS OF ELECTRONIC AND ATOMIC COLLISIONS, AIP PRESS, CANADA, WHISTLER, pp. 795 - 804, presented at XIX International Conference on the Physics of Electronic and Atomic Collisions (XIX ICPEAC), CANADA, WHISTLER, 26 July 1995 - 01 August 1995, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1995BF24U00064&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Preprints |

Wong XY; Zhuo Y; Shen Y, Cfd Modelling and Optimisation of Electrolyser Flow Channel Designs for Highly Efficient Hydrogen Production, http://dx.doi.org/10.2139/ssrn.4063741

Preprints |

Wu C; Zhuo Y; Xu X; Xie Z; Tang S; Jiang Y; Shen Y; Meng Q, A Comprehensive Study of Iron-Coke Briquettes’ Pyrolysis and Reduction Behaviour in an Industrial-Scale Pyrolyser, http://dx.doi.org/10.2139/ssrn.4074434

Please see details in the group website: http://www.SCoPE.unsw.edu.au/

Please see details in group website: http://www.SCoPE.unsw.edu.au/

President, Australiasian Particle Technology Society, 2019-present

My Research Supervision

see group website: www.SCoPE.unsw.edu.au

My Teaching

Teaching Commitment:

Advanced Transport Phenomena (CHEN6706)
Heat and Mass Transfer (CEIC2002)
Chemical Reaction Engineering (CEIC2005)
Engineering Design and Innovation (ENGG1000)
Chemical Engineering Lab (CEIC2007)

Follow

Professor Yansong Shen

Follow me